IMEX bidet faucets are the range of deck-mounted single-lever faucets that the Spanish brand IMEX manufactures in brass for the bidet, with a ceramic cartridge and series such as Olimpo, Delos, Génova, Nápoles, or Pisa, available in chrome, matte black, black gun metal, brushed gold, and brushed rose gold finishes.
If you are decorating your bathroom to match and you are missing the bidet faucet, this guide brings together on one page everything you need to know about IMEX bidet faucets: what models exist, how the series differ, what they are made of, how they are installed, and what alternatives you have when there is no bidet. All technical data is taken from the actual product sheets of the IMEX catalog on Merkimarket.
Key facts about IMEX bidet faucets
- Product type: deck-mounted single-lever faucet for bidet, mounted on the fixture itself.
- Body material: brass, the standard for bathroom faucets due to its corrosion resistance.
- Cartridge: ceramic, replaceable, which regulates flow and temperature with a single control.
- Available series: Olimpo, Delos, Génova, Nápoles, Pisa, and Art, many matching the basin and shower faucets of the same family.
- Finishes: chrome, matte black, black gun metal, brushed gold, and brushed rose gold.
- Features: swiveling aerator and, in the Génova series, cold open for energy savings.
- Warranty: minimum legal three years for consumers in Spain, plus the seller's commercial warranty.
With this summary you already have the essentials; below we develop each point so you can choose wisely.
What is a bidet faucet and how does it differ
The bidet faucet is a more compact single-lever faucet with a lower spout than the basin faucet, designed for a short and controlled stream over the fixture itself. In the IMEX faucet range, almost the entire range is deck-mounted: the faucet is installed in the bidet hole, not in the wall, with connection hoses for cold and hot water. Unlike the basin faucet, the bidet faucet usually incorporates a swiveling aerator that directs the water, and rarely needs a drain valve with a control, since the bidet empties through its own overflow.
The practical consequence is simple: you cannot simply reuse a basin faucet on the bidet. It is advisable to choose the specific bidet model from the same series so that the finish and design line match the rest of the bathroom.
IMEX bidet faucet series
As with the rest of the catalog, it is best to think in series: each one maintains a common design language in the basin, shower, and bidet, so that you can decorate the entire bathroom to match. These are the main families of bidet faucets available:
| Series | Character | Available finishes | Reference |
|---|---|---|---|
| Nápoles | Sober and balanced, the most understated option | Chrome, matte black, black gun metal | BDN047-2 |
| Génova | Contemporary, with cold open | Matte black, black gun metal | BDG053-2 |
| Delos | Elegant and timeless | Chrome, black gun metal, brushed rose gold | BDD055-2 |
| Olimpo | Robust and versatile, accepts a matching valve | Matte black, brushed gold, brushed rose gold | BDC033-2 |
| Pisa | Careful design in golden tones | Brushed gold | BDP048-2 |
| Art | Pure lines, strong character | Black gun metal | BDAR025-2 |
The prices of IMEX bidet faucets move, approximately, in a range of about €60 to €90, depending on the series, finish, and whether it includes a click-clack valve. Check each sheet for the current price and availability in Spain.
Materials, cartridge, and finishes: what is inside
What distinguishes a faucet that lasts is not the photo, but what is not seen. In IMEX bidet faucets, it is advisable to look at three things:
Body. All bidet faucets in the range are manufactured in brass, the reference material due to its corrosion resistance and its weight. Be wary of excessively light faucets: they usually betray zamak interiors in pieces that should be solid brass.
Cartridge. It is the heart of the single-lever faucet. The models feature a ceramic cartridge, the standard that regulates flow and temperature with a smooth touch and without drips for thousands of openings. It is a replaceable part, so a good cartridge extends the useful life of the faucet by years.
Finish. Here IMEX is strong. In addition to classic chrome, bidet faucets come in matte black, black gun metal, brushed gold, and brushed rose gold, with PVD treatment on the colored finishes, which is the one that best withstands daily cleaning without losing tone. A tip: choose the same finish for the basin faucet, the bidet faucet, and, if there is one, the valve; the detail that everything matches is what gives the feeling of a well-coordinated set.
Cold open (cold open): the star of the Génova series
Among IMEX bidet faucets, the Génova series incorporates cold open or cold open technology. In a conventional single-lever faucet, when you lift the handle in the center position, the valve mixes hot water even if you only want a quick stream; that turns on the boiler or the heater without the need. With cold open, the starting position of the handle delivers only cold water, and you only turn it to the hot side when you really need it.
In a bidet faucet, which is used for short and frequent discharges, this translates into real energy savings throughout the year, without giving up hot water when you ask for it. If your priority is consumption, Génova is the option to look at first.
How to install an IMEX bidet faucet step by step
The installation of a deck-mounted bidet faucet is manageable as a DIY project if you have the basic tools, although in case of any doubt, it is advisable to call a plumber. Broadly speaking, the process is this:
- Turn off the water. Shut off the bathroom stop valves and open the old faucet to drain any remaining pressure in the pipe.
- Dismantle the previous faucet. Loosen the hoses from below and remove the mounting nut that holds the faucet to the bidet deck.
- Prepare the new faucet. Screw the flexible hoses to the body of the IMEX faucet without over-tightening and place the gasket and the mounting element that comes standard.
- Place and fix. Insert the hoses through the bidet hole, seat the faucet centered, and tighten the lower nut so that it is firm, without gaps.
- Connect and check. Connect the hoses to the cold and hot water valves, open the flow little by little, and check that there are no leaks in any joint.
- Test the operation. Operate the handle in hot and cold, check the flow of the aerator, and adjust its orientation.
Always keep the model reference (the sheet code, type BDC033 or BDG053): it is what you will need to order a cartridge or a replacement aerator years later.
Alternatives when you do not have a bidet
More and more bathrooms dispense with the bidet due to lack of space, but the hygiene function can be maintained in other ways, and it is advisable to know them before deciding:
- Bidet shower (bidet shower faucet). A water handle with a trigger that is installed next to the toilet and fulfills the function of the bidet occupying hardly any space. IMEX offers it in several concealed series.
- Toilet seat with bidet function. It integrates the washing in the WC itself, without an additional faucet, although it requires a nearby water supply.
- Basin faucet with swiveling spout. It does not replace the bidet, but in very small bathrooms it is the basis on which the renovation is decided.
If you keep the bidet, the logical thing is to choose the specific faucet to match the rest; if you remove it, the bidet shower is the most practical alternative. To decide the complete set, our guide to bathroom faucets: types and finishes will help you.
Warranty, spare parts, and maintenance
When buying faucets in Spain you have the minimum legal warranty of three years against non-conformities for consumers, to which the seller can add their own commercial warranty and their spare parts service. In everyday life, maintenance is minimal: clean the finish with a damp cloth and neutral soap, avoiding abrasive products and aggressive anti-limescale products that can damage the PVD of the colored finishes. If over time the aerator loses flow due to limescale, it is unscrewed and cleaned in vinegar; and if the single-lever faucet starts to drip, it is almost always solved by changing the ceramic cartridge, not the entire faucet.
Ready to see it in product? Explore the complete IMEX faucet catalog or go directly into two references to get an idea of finish and quality: the Olimpo bidet faucet in brushed gold and the Génova bidet faucet with cold open. And if you are completing the bathroom, you will be interested in our guide to IMEX basin faucets.
Frequently asked questions about IMEX bidet faucets
What material is IMEX bidet faucets made of?
IMEX bidet faucets are manufactured in brass, with a replaceable ceramic cartridge. Brass is the standard for bathroom faucets due to its corrosion resistance and its durability against continuous moisture.
Which IMEX bidet faucet series should I choose?
It depends on the finish and the rest of the bathroom: if you want to save energy, the Génova series incorporates cold open; if you are looking to match a matching valve, the Olimpo is very versatile; and the Nápoles is the most understated option. The ideal is to choose the same series as your basin faucet.
Can I put a bidet faucet if I do not have a bidet?
Not directly, but you can maintain the function with a bidet shower installed next to the toilet or with a WC seat with bidet function. They are the most common alternatives in bathrooms without space for the bidet.
What warranty does an IMEX bidet faucet have?
As any product sold to consumers in Spain, it is covered by the minimum legal warranty of three years against defects of conformity, which the seller can complement with their commercial warranty and the availability of spare parts such as cartridges and aerators.
Article written by the Merkimarket editorial team. Technical data (series, materials, cartridges, and finishes) taken from the product sheets of the Merkimarket IMEX catalog. Price ranges and availability may vary; check each sheet for the current information in Spain.
