The IMEX Moscú series is a line of bathroom faucets manufactured entirely from S316 stainless steel, designed for those seeking a recessed shower with a clean look and high resistance to humidity. It brings together a recessed shower set, an extendable shower column, basin and bidet faucets, and a thermostatic bathtub faucet, all matching.
Within IMEX's extensive catalog, the Moscú series occupies a very specific place. It is the brand's commitment to stainless steel and the recessed look: the faucet disappears into the wall and only the handle and the water outlet stay in view.
If you are renovating your bathroom and wonder whether Moscú is right for you, here is everything the series offers. You will see what it is made of, which models make it up and how to choose yours. All technical data is taken from the actual product sheets in the IMEX faucet catalog at Merkimarket.
Key facts about the Moscú series
- Material: S316 stainless steel throughout the series, in both the faucets and the showers.
- Character: minimalist design oriented toward recessed installation and high-spout faucets.
- Product families: recessed shower set, shower column, basin, bidet, and thermostatic bath/shower faucet.
- Technology: ceramic cartridge in the single-lever faucets and thermostatic cartridge in the shower and bathtub sets.
- Shower column: extendable from 88 to 125 cm, making it easy to adapt to existing installations.
- Finishes: natural stainless steel and chrome, depending on the model.
- Click-clack option: basin and bidet faucets can be ordered with or without a matching drain valve.
- Warranty: statutory minimum of three years for consumers in Spain, plus the seller's commercial warranty.
With this summary, you can now place the series; below, we develop each point so you can make an informed decision.
What the Moscú series is and who it is intended for
Moscú is the IMEX series that responds to two trends that often go hand in hand: the minimalist bathroom and recessed faucets. Instead of a bulky faucet on the wall or shelf, the series opts for slender bodies, high spouts with straight lines, and shower sets that integrate into the tiling. The result is a more uncluttered bathroom that is easier to clean, with no nooks and crannies where limescale can accumulate.
It is a series suited to renovations where you want a contemporary finish without giving up durability. Being made of stainless steel, it fits well in bathrooms with high humidity and in second homes near the sea. It is also a good option if you want a material that lasts for years without pitting or staining.
If you are looking for a more versatile IMEX series with more color finishes, the natural alternative is the Monza series. Moscú, on the other hand, is the specialist in steel and recessed fittings.
S316 stainless steel: why it is the key to the series
What truly defines Moscú is not the photo, but the material. The entire series is manufactured in S316 stainless steel, also known as surgical or marine-grade steel.
Compared to the chrome-plated brass usually found in faucets, S316 contains molybdenum in its alloy. This gives it superior resistance to corrosion from chlorides, that is, to continuous humidity, limescale-rich water and saline environments. In practice, it is the steel that suffers the least in a bathroom used daily.
This has two everyday advantages.
- Hygiene. Stainless steel is a non-porous surface that is easy to clean and does not tend to retain soap or limescale residue.
- Finish stability. Unlike some color treatments, which can wear off with aggressive cleaning, the steel keeps its appearance with a simple damp cloth.
Water and a neutral detergent are enough for cleaning. Avoid abrasive scourers and products with strong acids: they are not needed and will eventually scratch any surface.
The models in the Moscú series, one by one
The Moscú series allows you to furnish the entire bathroom while maintaining the same design language. These are the models that comprise it, with their catalog reference (useful for ordering spare parts in the future):
- Recessed thermostatic shower set (GTK034). This is the series' flagship model: a recessed shower with a thermostatic cartridge that keeps the temperature stable and protects against hot water surges. Around €270.
- Extendable shower column (BDK034). Exposed column in S316 stainless steel, extendable from 88 to 125 cm, designed to replace an old column using existing water inlets. Around €240.
- Single-lever basin faucet, chrome finish (BDK034-1). The standard-height basin faucet of the series, available with or without a click-clack valve. From around €70.
- High-spout single-lever basin faucet (BDK034-3). High version, ideal for vessel-type countertop sinks. Also with an option for a matching valve. From around €100.
- Single-lever bidet faucet (BDK034-2). Completes the basin and bidet set with the same design. From around €74.
- Thermostatic bath/shower faucet (BDK034-4). For those who have a bathtub or an exposed shower and want the safety of a thermostat. Around €258.
Prices are indicative and may vary; check each product sheet for the current amount in Spain. You can see the star model in detail on the Moscú recessed shower set product sheet.
Comparative table of the Moscú series
| Model | Reference | Cartridge type | Best suited for |
|---|---|---|---|
| Recessed shower set | GTK034 | Thermostatic | Built-in shower, new bathroom |
| Extendable shower column | BDK034 | Thermostatic | Replacing existing column (88–125 cm) |
| Standard basin faucet | BDK034-1 | Single-lever ceramic | Wall-mounted or vanity sink |
| High-spout basin faucet | BDK034-3 | Single-lever ceramic | Countertop basin |
| Bidet faucet | BDK034-2 | Single-lever ceramic | Bidet matching the basin |
| Thermostatic bath/shower faucet | BDK034-4 | Thermostatic | Bathtub or exposed shower |
The Moscú recessed shower: what you need to know before installing
Moscú's great asset is the recessed shower, but it is also what requires the most planning. Unlike an exposed column, the recessed set leaves the thermostatic body inside the wall, so only the trim with the handles and the water outlet remain visible. It looks impeccable, but it involves construction: you have to plan for the recess in the partition and ensure the installation is at the correct height.
Before deciding, keep three things in mind.
- The timing of the renovation. Recessed units are installed while the tiling is open, so it is best to decide at the beginning, not at the end.
- The outlet height. Position the top showerhead inlet with the tallest person in the house in mind, usually above 2 meters.
- Future maintenance. The thermostatic cartridge is a replaceable part. Keep the reference (GTK034) so you can order spare parts years later.
If you want to delve deeper into this type of installation, our guide on IMEX recessed faucets will be useful. And if you are still undecided between recessed, column or bar, compare them in this comparison of IMEX showers.
How to choose your Moscú set in 4 steps
- Decide on the type of shower. If you are in the middle of construction and want the cleanest finish, go for the recessed set (GTK034). If you are only changing the faucet on existing inlets, the extendable column (BDK034) is the option that doesn't involve breaking the wall.
- Choose the basin faucet based on the sink. For a wall-mounted or vanity sink, the standard model (BDK034-1). For a vessel-type countertop sink, the high-spout model (BDK034-3), which leaves space for your hands.
- Add the matching bidet and valve. If you have a bidet, the BDK034-2 maintains consistency. And remember to choose the matching click-clack valve: it is the detail that completes the set.
- Confirm measurements and inlets. Check the distance between shower inlets and the available height. For the column, verify that the 88 to 125 cm range covers your current installation.
Moscú compared to other IMEX series
Within the IMEX catalog, Moscú competes less on price than on material and style. Series like Monza offer a much wider range of color finishes (brushed gold, rose gold, black gun metal) and also cover kitchen needs. Moscú, on the other hand, focuses on stainless steel and the bathroom.
In other words: if your priority is to combine trendy colors, look at Monza. If you want a sober, resistant and easy-to-maintain bathroom, with the added value of S316 steel and a recessed shower, Moscú is the most rational choice. In both cases, we are talking about faucets with ceramic or thermostatic cartridges and the same quality-to-price philosophy as the brand.
Frequently asked questions about the IMEX Moscú series
What material is the Moscú series made of?
The entire IMEX Moscú series is manufactured from S316 stainless steel, an alloy with molybdenum that offers very high resistance to corrosion, humidity, and limescale, in addition to being hygienic and easy to clean.
Can the Moscú shower column be used to replace another without construction work?
Yes. The Moscú shower column (BDK034) is extendable from 88 to 125 cm, which allows it to be adapted to the inlets of a previous column in most installations without the need to break the tiling.
What is the difference between the recessed set and the exposed column?
The recessed set (GTK034) hides the thermostatic body in the wall and requires construction, resulting in a cleaner finish. The exposed column (BDK034) is mounted over the tiling and is simpler to install or replace.
What is the warranty on Moscú faucets?
Like any product sold to consumers in Spain, it is covered by the statutory minimum warranty of three years against defects in conformity, which the seller can complement with their own commercial warranty and availability of spare parts.
Ready to see it in person? Explore the series in the complete IMEX faucet catalog and compare finishes before deciding.
Article written by the Merkimarket editorial team. Technical data (material, references, cartridges, and measurements) taken from the Merkimarket IMEX catalog sheets. Price ranges and availability may vary; check each product sheet for information valid in Spain.
